|
|
| |
|
1-Channel Micro Injector - Spritzer
An injector with pressure and timing control. Simple to use.
Does not require an external source of pressure (generates pressure up to 15PSI).
The controller regulates output pressure to provide defined solution flow through injection capillaries, sample chambers,
and microfluidics chips (prevents flow blockage by bubbles inside solutions).
The injector is activated either by a TTL signal (BNC and DB-9 connectors), or by a manual switch/foot pedal and duration dials (10ms min., 2.78h max.).
In addition to manual dials, the output pressure can be set by analog signals, that can be used to generate smooth pressure changes (BNC connectors).
An indicator of active state. Manual override buttons provide defined pressure bypassing electronics control.
Includes 1mm injection capillary holder and connecting tubing; includes foot switch and connecting cable.
Ideal for injection into single cells. Click on image to enlarge.
Specifications: |
Output: | max 15PSI |
Connectors: | Easy-connect, 5/32in. (4mm) O.D. tubing |
Indicators: | LED to show active channel LCD to monitor pressure |
Controls: |
OUTPUT PRESSURE set,
SWITCH to activate and turn OFF active channels,
DURATION dial 10ms min.- 2.78h max.,
MANUAL override,
FOOT pedal to activate,
TTL input (+5V to start),
ANALOG input to set pressure,
MONITOR pressure - analog output |
Dimensions: | 6 x 2.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
1-Channel Micro Injector - Spritzer, for use with external pressure source
Similar to the above but requires a source of pressure. Three output pressure ranges are available: 25, 50 and 100PSI.
Can be used to to deliver solutions through micropipettes when a higher pressure outputs might be required.
Specifications: |
Input: | max 150PSI |
Output: | max 25/50/100 PSI |
Connectors: | Easy-connect,
5/32in. (4mm) O.D. tubing |
Indicators: | LED to show active channel LCD to monitor pressure |
Controls: |
OUTPUT PRESSURE set,
SWITCH to activate and turn OFF active channels,
DURATION dial 10ms min. - 2.78h max.,
MANUAL override,
FOOT pedal to activate,
TTL input (+5V to start),
ANALOG input to set pressure,
MONITOR pressure - analog output |
Dimensions: | 6 x 2.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
1-Channel Micro Injector - Spritzer, manual pressure set, for use with external pressure source
Similar to the above but does not provide means of electronic control for defined consistent pressure output.
Instead a manual pressure regulator are used to set pressure. Three output pressure ranges are available: 25, 50 and 100PSI.
Can be used to to deliver solutions through micropipettes when a higher pressure outputs might be required.
Specifications: |
Input: | max 150PSI |
Output: | max 25/50/100 PSI |
Connectors: | Easy-connect,
5/32in. (4mm) O.D. tubing |
Indicators: | LED to show active channel LCD to monitor pressure |
Controls: |
OUTPUT PRESSURE set,
SWITCH to activate and turn OFF active channels,
DURATION dials 10ms min. - 2.78h max.,
MANUAL override,
FOOT pedal to activate,
TTL inputs (+5V to start),
|
Dimensions: | 6 x 5.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
Click on catalog numbers below to purchase online.
Optional accessories: SVDS1,
or pressure cylinders.
Download PDF catalog.
|
|
Bioscience Tools
ph: 1-877-853-9755
ph: 1-619-582-1597 (from outside USA)
fax: 1-619-582-0919
email: info@biosciencetools.com
|
PRICES AND OPTIONS |
UC-1 |
$2,150 |
1-Channel Micro Injector - Spritzer
|
UC-1-25 |
$1,950 |
1-Channel Micro Injector - Spritzer 25PSI output, for use with external pressure source
|
UC-1-50 |
$1,950 |
1-Channel Micro Injector - Spritzer 50PSI output, for use with external pressure source
|
UC-1-100 |
$1,950 |
1-Channel Micro Injector - Spritzer 100PSI output, for use with external pressure source
|
UC-1-100M |
$1,650 |
1-Channel Micro Injector - Spritzer 100PSI output, manual pressure set, for use with external pressure source
|
UC-1-50M |
$1,650 |
1-Channel Micro Injector - Spritzer 50PSI output, manual pressure set, for use with external pressure source
|
UC-1-25M |
$1,650 |
1-Channel Micro Injector - Spritzer 25PSI output, manual pressure set, for use with external pressure source
|
|
|
)