Cylinder to pressurize/oxygenate solutions, set of 8
A set of autoclavable
cylinders to pressurize your solutions. For use with pressure controllers.
Can be used to drive solutions through 100 micron tip of MM manifold, for example.
Can be also used to saturate solutions with gases (bubbling) by feeding a thin tubing inside the cylinder.
Comes with stop-cocks and fitting for 1/16 in. I.D. tubing.
Includes a 3-way valve to connect to a pressure source, to release the pressure, to refill the cylinder, or to connect to a source of
gas mixture (oxygenation, for example). Comes with threaded cover for easy refill. Material: polypropylene.
Specify volume when ordering. Large 650ml volumes are available upon request.
Cylinders with built-in 10, 25 or 40 micron filters are also available (specify when ordering).
Volumes up to 100ml fit to our SH-1A syringe holders. Click on image to enlarge.
Pressure controller
For use with small volume delivery and solution switches
with pressure switches.
Generates pressure up to 15PSI (does not require an external source of pressure).
The controller regulates output pressure to provide defined solution flow through sample chambers, microfluidics chips for example.
Prevents flow blockage by bubbles inside solutions. If connected to a solution switch,
the controller starts automatically every time perfusion is ON.
Simple to use. Click on image to enlarge.
Specifications: |
Output: | max 15PSI |
Connectors: | Easy-connect,
5/32in. (4mm) O.D. tubing |
Indicators: | PRESSURE digital indicator,
output LOW, output CLOSE |
Controls: | CLOSE manual switch, CLOSE TTL input (+5V to start),
OUTPUT PRESSURE settings, MANUAL dial to SET pressure, EXTERNAL input to SET pressure, MONITOR pressure - analog output |
Dimensions: | 6 x 2.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
Pressure regulator
For use with small volume delivery and solution switches
with pressure cylinders.
Connects to a cylinder with a compressed gas mixture (max. input 100PSI).
The controller regulates output pressure to provide defined solution flow through sample chambers, microfluidics chips for example.
Prevents flow blockage by bubbles inside solutions. Simple to use.
Click on image to enlarge.
Specifications: |
Input: | max 100PSI |
Output: | max 25PSI |
Connectors: | Easy-connect,
5/32in. (4mm) O.D. tubing |
Indicators: | PRESSURE digital indicator,
output LOW, output CLOSE |
Controls: | INPUT PRESSURE
regulator 0-100PSI, CLOSE switch, CLOSE TTL input (+5V),
OUTPUT PRESSURE settings, MANUAL dial to SET pressure, EXTERNAL input to SET pressure, MONITOR pressure - analog output |
Dimensions: | 6 x 2.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
Click on catalog numbers below to purchase online.
Required accessories: pressure controller,
perfusion system,
gas delivery adapter.
Download PDF catalog.
|
)
)