|
|
| |
|
Sink Cooling Unit, BTC-W
This water cooler is used to bring temperature of the sink of cooling stages down by actively decreasing temperature of water running through
the sink.
Able to decrease the temperature of water down to 14°C, which is required for deep cooling of your sample.
Requires a peristaltic pump to run water through the unit.
Click on image to enlarge. Includes tubing and 24VDC power supply with three outlets (can be used to power
the temperature controllers, BTC-1-100 or TC2-80-150.
Specifications: |
Dimensions: | 7 x 3.5 x 9 in |
Ports: | IN and OUT barbed ports, 1/8
in I.D. |
Power supply: | 24V, 4A DC, three
outlets to power temperature controller, and optional
water pump |
Output: | cools water down to 14°C |
Here is a graph demonstrating the effect of active sink cooling. Initially the controller was SET to 0°C, which resulted to
fast drop of the cooling stage temperature. Temperature did reach some level around 5°C, but than started increasing slowly.
Turning ON the water cooler, resulted to temperature stabilization. After the unit turned OFF, however, temperature inside
the cooling stage started to rise as a result of heat dissipation through the sink, which itself became warmer than room.
Turning the water cooler ON brought temperature down again. These data were obtained by digitizing (through
PC-DA system) the Analog output of BTC-1-100
controller, which was connected to BTC-S cooling stage.
Click on catalog numbers below to purchase online.
Required accessories: 1-channel or
2-channel temperature controller,
cooling stages, peristaltic pump.
Optional accessories: miniature pump.
Download PDF catalog.
|
|
Bioscience Tools
ph: 877-853-9755, fax: 866-533-7490
ph/fax: 1-619-793-4467 (from outside USA)
fax: 866-533-7490
email: info@biosciencetools.com
|
PRICES AND OPTIONS |
BTC-W |
$725 |
Water cooling unit for peltier stages
|
|
|
