| |
|
Growth of human lymphocytes in Petri dishes placed inside incubator connected to a 2-channel temperature and CO2 controllers.
The pictures taken before and after 60 hours (2.5 days) incubation show cells growing to cover the whole bottom of the Petri dish.
Provided by Rui Liu from Kun Zhang lab, UCSD La Jolla, CA
Miniature Incubator with heated bottom, TC-MWPHB/L
For use with standard multi-well plates. Fits all brands of motorized stage.
Incorporates heated bottom, luer-lock port for gas mixture (to control CO2 or hypoxia),
and heated cover, to prevent condensation. Built-in multiple ports for
tubing and accessories (probes and sensors).
Can be used with a set of adjustable tubing
holders to position perfusion tubing for continuous media exchange,
if optional inserts TC-I-100 or TC-I-4/3 are placed inside
(see table below).
The bottom is closed with 1mm glass (for open bottom incubator, to access with immersion objective -
consider another model). Can be used for long-term imaging.
Consider a modified incubator for easy positioning of tubing to
deliver media and test solutions. Click on image for inside view.
Specifications: |
Outside dimensions: | fits
160x110mm cutout of motorized stages; the bottom is recessed 10mm below the top surface (7mm below the mounting surface)
of motorized stages, and can be elevated by set screws positioned in the corners of the incubator base |
Heated bottom: | 1mm glass |
Optical window and
clearance: | 112x72mm
window on the bottom;
33mm from sample to top surface; 23mm for low-profile
option; optional spacers allow to elevate the top surface 9.5mm - to provide more space inside the incubator |
Stability: | 0.01°C |
Use with: | Standard
multi-well plates, 35mm dishes, and 1x3in. glass coverglasses/slides |
Condensation free lid: | Uses
a built-in temperature sensor to connect independently to
the second channel of temperature controllers, 81x121mm optical window |
CO2 port: | Luer-lock connector to a source of gas mixture. |
Media exchange and perfusion: |
Multiple sealed inflow/outflow ports, an optional set of adjustable tubing holders to position inflow and outflow tubing inside sample chambers. |
Click on catalog numbers below to purchase online.
Required accessories: temperature controller,
CO2 controller.
Optional accessories: inserts (see table below).
Download PDF manual.
Download PDF catalog.
|
|
Bioscience Tools
ph: 1-877-853-9755
ph: 1-619-582-1597 (from outside USA)
fax: 1-619-582-0919
email: info@biosciencetools.com
|
PRICES AND OPTIONS |
TC-MWPHB |
$425 |
Miniature Incubator for multi-well plates, with closed heated bottom.
|
TC-MWPHBL |
$365 |
Miniature Incubator for multi-well plates, with closed heated bottom, low profile
20mm high
|
TC-I-100 |
$95 |
Set of metal inserts, to position adjustable holders, can be used with chambers up to 100mm
diameter |
TC-I-4 |
$95 |
A metal insert, to position adjustable holders, can be used with x4 dishes and chambers
up to 38mm diameter, reducing adapters might be required for different brands |
TC-I-3 |
$95 |
A metal inserts, to position adjustable holders, can be used with slides and coverglasses |
MH-MIS |
$95 |
Set of miniature adjustable tubing and sensor holders, x3, includes 4-40 threaded posts
|
TC-I-E |
$95 |
Spacer to elevate the cover 9.5mm
|
TC-PA-C |
$30 |
Reducing adapter-ring, for Corning type dishes.
|
TC-PA-N |
$30 |
Reducing adapter-ring, for Nunc type dishes.
|
TC-PA-W |
$30 |
Reducing adapter-ring, for Willco dishes.
|
TC-PA-F |
$30 |
Reducing adapter-ring, for FluoroDishes.
|
TC-MI-TP |
$95 |
Adapter cable to connect the incubator lid in parallel with the base to the same channel of
a temperature controller, includes cable-extension to monitor inside temperature
|
|
)